Mennekes | Amedio - Configuration for ChargePilot

Before starting the configuration, please check the charger firmware version complies with the latest compatible firmware version.

Please follow the instructions in ebee - Configuration for ChargePilot

Addtional or deviating steps are listed below

Connection to the charger
Login credentials	Username: operator Password: aquired from the customer
Other charger settings
Fallback settings Fallback works only with the FW version ≥ 5.33.x Navigate to Load Management → Local Enable Disconnected Upper Limit for SmartCharging: Disable
MeterValueSampleInterval (if not 4s) Configuration of the MeterValues interval for the connector 2 (This step should still be done maually within the current FW version) Option 1: Add the envvar `MeterValueSampleInterval_2` = 4s in Balena Option 2: Open the webinterface of the connector 2, change the field “Meter Value Sample Interval (OCPP)” to 4s

Connection to the charger