ebee - Configuration for ChargePilot

Connection to the charger

Local connection

1. Go to the charger web interface

   1. If you log in for the first time or use the station neither with controller nor dhcp server (stand-alone), connect your laptop directly with the wallbox and enter http://192.168.123.123/operator in your web browser to reach the web interface

   2. If the station is already integrated to a local controller, connect via switch or port forwarding

   3. Run network-scan to identify the right IP-address for the selected charge point

   4. Enter charger´s IP-address in your web browser to connect to web UI

Login Data:
Username: operator
PW: aquired from the vendor or customer

For chargers with double connectors

The master controller and the slave controller share the same IP-address but different ports.

• Typing <charger_ip>:81 in the web browser can access the general settings page (settings for both connectors)

• Typing <charger_ip>:82 in the web browser can access the connector 2 (slave) settings

Network settings

Ethernet

1. Navigate to Network → LAN

2. Set Mode for Ethernet-configuration to Automatic (DHCP)

OCPP settings

Backend

1. Navigate to Backend → OCPP

2. Configure the Parameters as follows:

   1. ChargePointID: according to the protocol

   2. OCPP Modus: OCPP-J 1.6

   3. WebSocket JSON OCPP URL: ws://172.22.0.1:9000

Other charger settings

Authorization settings

1. Navigate to Authorization

   • Free Charing: Off

Autocharge/Free charging settings

When this function is activated, charger starts transaction either with the identifier predefined in the charger, or with the EV MAC address (Plug & Charge).

• Autocharge: On

• EVCCID or EV's MAC address prefix for OCPP authorization: P&C (max. 8 characters allowed)