Schneider Electric | EVlink Pro AC - Configuration for ChargePilot

Connection to the charger

Local connection

Connect to the charger per app

1. Download the eSetup app on the smart phone

2. Start a commissioning session → select EV Chargers → select EVlink Pro AC

3. Turn on the bluetooth connection of the smart phone. The detected chargers will be shown in the app

4. Select the charger to be configured. For the first connection, it is required to set the password for the charger

Network settings

Ethernet

• Go to Configuration → Connectivity → Network settings

• Mode for Ethernet configuration: DHCP (ON)

• Click the “Save” button

OCPP settings

Backend

• Go to Configuration → Connectivity → Supervision

• Supervision: ON

• WebSockets JSON OCPP URL of the Backend: ws://172.22.0.1:9000

OCPP ChargeBox ID

• Serial number of the charger by default or according to the installation protocol

• Click the “Save” button