Basic Requirements for Smart Charging with ChargePilot
Parameters of Charger Configuration
Category | Required | Comment |
Smart Charging | Activate, via OCPP 1.6 JSON | Allow TxProfiles and TxDefaultProfiles |
Fix IP address | No fix address to be set! | Instead, each charger shall allow our DHCP to provide an IP address |
Internal DHCP Server (Charger) | inactive | If possible / necessary to determine for each port separate, deactivate DHCP server at least for port 9000 |
OCPP endpoint | ws://172.22.0.1:9000 | 172.22.0.1: IP adress Local Controller 9000: Network software port |
Meter Value Interval | 4 s | Necessary for dynamic Load Management |
Device ID | – to be chosen – | In our Installation Protocol, please inform us on your settings for the Device ID (Mostly default: Device Serial Number) |
(optional) Authorization | Authorization via Backend:
| RFID: Delivered Cards / Fobs already activated Free Charging: Inform us on the tag e.g. PLUGANDCHARGE MAC Adress: DC Charging only |