Alfen Eve Double - Configuration for ChargePilot
Check Alfen Eve Single Configuration Instruction EN: Alfen Eve Single Pro Line - Configuration for ChargePilot
Except for some differences the configuration process follows the same steps as already described for the Alfen Eve Single.
Alfen Eve Double (two current leads) | Alfen Eve Double (one current lead) | |
|---|---|---|
Max. Power | 44 kW (2x 22 kW) | 22 kW (2x 11 kW) |
Station Max. Current | 64 A | 32 A |
Connector 1 Max. Current | 32 A | 32 A → intern load management |
Connector 2 Max. Current | 32 A | 32 A → intern load management |
Static Load Balancing | DEACTIVATED | ACTIVATED |
Configuration Settings Alfen Eve Double | ||
|---|---|---|
2 Power Settings |
Depending on the Alfen Eve Double model the Power Settings should be set as you can see in the table above. It is possible to change the Station maximum current as well as the Max current of both connectors (Connector 1 and Connector 2). The screenshot shows the power settings of an Alfen Eve Double powered by one current lead. Make sure the current values are exactly set to ensure charging processes without exceeding the maximum fuse limit. |  |
3 Load balancing |
Check if both sockets are powered by one current lead or two current leads. If the station is only powered by one current lead, ensure that the intern Static Load Balancing is activated! |  |
